|
INSTALLATION
ASSEMBLY SEQUENCE KIT 1 AND KIT 3 |
|
WE ADVISE TO TAKE SAFETY MEASURES WITH:
-PROTECTIVE EQUIPMENT
-SAFETY LADDER
-OR A BASKET CRANE
 Enlarge
|
 |
OPEN A BIT THE RING PC-A TO MAKE EASY THE ASSEMBLY
Enlarge |
 |
PUT THE RING AROUND THE CENTRAL LEAVES
Enlarge |
 |
INSERT THE MOBILE SIDE IN THE MIDDLE OF CENTRAL LEAVES
Enlarge |
 |
PUSH THE RING TO THE UTMOST DOWN, MAKING SURE THAT THE MOBILE SIDE OF THE RING WILL BE WELL PLACED AND FIXED INSIDE THE CENTRAL LEAVES
Enlarge |
 |
TIGHTEN SCREW THE RING TO THE UTMOST AROUND THE LEAVES. TO FINISH THE ASSEMBLY PUTTING THE RING IN HORIZONTAL POSITION. THEN PROCEED WITH THE CONNECTION.
Enlarge |
 |
HANDY ADVICE: FOR THE AESTHETICS OF THE PALM TREE AND PROTECTION OF THORNS, INSERT THE IRRIGATION PIPE THROUGH A TUBE WITH INSIDE DIAMETER SUPERIOR, PREVIOUSLY INSERTED IN THE MIDDLE OF THE LEAVES.
Enlarge |
 |
IN THE CASE OF PC-E THE ASSEMBLY IS MORE EASIER THAN THE OTHER BECAUSE IT'S ENOUGH TURNING AROUND THE HEART OF THE PALM LIKE A SCREW.
Enlarge |
 |
|
| INJECT INSTALLATION |
REALLY IMPORTANT:
-TO PREVENT DAMAGE THE BUD OF THE PALM TREE DO NOT DRILL LESS THAN 1 METER AND HALF FROM THE TOP OF THE PALM
TOOLS AND ACCESSORIES NEEDED:
| -1 DRILL |
| -1 DRILL BIT OF 10 mm. |
| -1 DRILL BIT OF 6 mm AND 50 cm LENGTH |
| -3 METERS OF WIRE |
| -1 HOOK TO FIX THE DRUM |
DRILL A DEPTH OF 10 cm WITH A DRILL BIT OF 10 mm. DRILL DOWN IN A DIAGONALLY DIRECTION TO IMPROVE THE LIQUID FLOW.
Enlarge |
 |
INSERT THE COPPER TUBE WITH NUT WITH THE HELP OF A RUBBER HAMMER ALLOWING EMERGE 6 cm FOR THE FUTURE CONNECTION
Enlarge |
 |
WITH THE LONG DRILL BIT OF 6 mm OF DIAMETER, DRILL THROUGH THE COPPER TUBE INSTALLED UNTIL ACHIEVE THE CENTER OF THE TRUNK. REPEAT THE OPERATION TWO OR THREE TIMES TO LEAVE THE HOLE FREE OF WASTES
Enlarge |
 |
USE THE CONNECTION WITH "T" SHAPE, AS THE FIRST CONNECTION NEAR THE DRUM INJECTION
Enlarge |
 |
USE THE CONNECTIONS WITH "L" SHAPE FOR FINAL CONNECTIONS
Enlarge |
 |
|
| TO MAKE EASY THE INSTALLATION OF THE INJECTION DRUM |
| FOR ATTACH THE DRUM IS RECOMMENDED THE INSTALLATION OF ONE IRON WIRE TO HOOK IT. TO HELP YOU BETTER IN THIS OPERATION WHEN YOU INSTALL IT ALONE, MAKE AS FOLLOW: |
FOLD IN "U" SHAPE AN IRON ROD OF 6 mm OF DIAMETER. FOLD THE EXTREMITIES TO MAKE EASY THE HOOK UP.
Enlarge |
 |
HUG THE TRUNK WITH THE IRON ROD IN "U" SHAPE. HOOK UP THE EXTREMITIES TO MAKE EASY THE NEXT OPERATION.
Enlarge |
 |
FIX IN ONE EXTREMITY THE IRON WIRE
Enlarge |
 |
WITHDRAW ALL IN AN OPPOSITE DIRECTION AND LINK THE IRON WIRE EXTREMITIES. THEN HOOK UP THE DRUM
Enlarge |
 |
INSTALLATION OF THE DRUM INJECTION. FOR THE AESTHETICS OF THE PALM TREE WE ADVISE TO CARRY OUT THE INSTALLATION IN THE HIDDEN SIDE OF THE PALM TREE.
Enlarge |
 |
COMPLETE ASSEMBLY WITH SPRAY AND INJECTION SYSTEM AND SPRAY PUMP EQUIPMENT.
Enlarge |
 |
|
|
|
